Keywords
bone
non-invasive techniques
mechanical properties
biomaterials
non-invasive techniques
mechanical properties
biomaterials
How to Cite
Velez-Cruz, A. J., & Farinas-Coronado, W. (2022). Review-Bone Characterization: Mechanical Properties Based on Non- Destructive Techniques. Athenea Engineering Sciences Journal, 3(10), 16-29. https://doi.org/10.47460/athenea.v3i10.45
Abstract
This paper characterizes the state of the art in the mechanical properties of bone and seeks new avenues aligned with non-invasive characterizations to better fit and produce innovative technologies within the biomedical implant field and early detection of bone diseases. It is concluded that the combination of these methods and non-invasive techniques contribute significantly to obtaining the mechanical properties of the bones, which could be extremely useful in the early detection of bone diseases, development of biological models, and performing mechanical analysis with the intent to predict abnormal biological behaviors in human beings.
References
[1] J. E. Uellendahl, "Barriers to Clinical Application: A Prosthetist's View," Journal of Prosthetics and Orthotics, vol. 18, p. 123, 2006.
[2] J. Foort, "Modular prosthetics-a philosophical view*," Prosthetics and Orthotics International, vol. 3, November 1978.
[3] S. Jonsson, K. Caine-Winterberger and R. Branemark, "Osseointegration amputation prostheses on the upper limbs: methods, prosthetics and rehabilitation," Prosthetics and Orthotics International, vol. 35, no. 2, pp. 1990-200, January 2011.
[4] A. B. Wilson, "Lower-limb modular prostheses: a status report," Orthotics and Prosthetics, vol. 29, no. 1, pp. 23-32, 1975.
[5] B. Resnick, "The Problem With Modern-Day, High-Tech Prosthetics," Popular Mechanics, March 2010. [Online]. Available: http://www.popularmechanics.com/science/health/a6302/high-tech-prosthetics-fitting/. [Accessed January 2016].
[6] A. Tathe, M. Ghodke and A. P. Nikalje, "A brief review: biomaterials and their application," International Journal of Pharmacy and Pharmaceutical Sciences, vol. 2, no. 4, pp. 19-23, 2011.
[7] J. R. Jameson, "Characterization of bone material properties and microstructure in osteogenesis imperfecta/brittle bone disease," Marquette University, Milwaukee, 2014.
[8] S. L. Lancianese, E. Kwok, C. A. Beck, and A. L. Lemer, "Predicting regional variations in trabecular bone mechanical properties within the human proximal tibia using MR imagining," Bone, vol. 43, no. 6, pp. 1039-1046, 2008.
[9] S. Bhalla and S. Bajaj, "Bone characterization using piezo transducers as biomedical sensors," Strain, vol. 44, no. 6, pp. 475-478, 2008.
[10] J. Chen, M. A. Birch and S. J. Bull, "Nanomechanical characterization of tissue-engineered bone grown on titanium alloy in vitro," Journal of Materials Science: Materials in Medicine, vol. 21, no. 1, pp. 277-282, 2009.
[11] F. G. Evans, "Mechanical properties of bone," Artificial Limbs, vol. 13, no. 1, pp. 37-48, 1973.
[12] A. D. P. Bankoff, "Biomechanical characteristics of the bone," in Human Musculoskeletal Biomechanics,
London, IntechOpen, 2012, pp. 61-86.
[13] M. Kutz, T. M. Keaveny, E. F. Morgan and O. C. Yeh, "Chapter 8," in Standard handbook of biomedical
engineering and design, New York, McGraw-Hill, 2003.
[14] A. Kemper, C. McNally, E. Kennedy, S. Manoogian, and S. Duma, "The material properties of human tibia cortical bone in tension and compression: implications for the tibia index," Virginia Tech – Wake Forest, Center for Injury Biomechanics, Blacksburg, 2007.
[15] K. G. Faulkner, C. C. Glüer, S. Majumdar, P. Lang, K. Engelke, and H. K. Genant, "Noninvasive measurements of bone mass, structure, and strength: current methods and experimental techniques," American Journal of Roentgenology, vol. 157, no. 6, pp. 1229-1237, 1991.
[16] K. Buckley, J. Kerns, P. D. D. Gikas, H. L. Birch, R. Keen, A. W. Parker, P. Matousek, and A. E. Goodship, "Measurement of abnormal bone composition in vivo using noninvasive Raman spectroscopy," IBMS Bonekey, vol. 11, no. 602, 2014.
[17] S. Parithimarkalaignan and T. V. Padmanabhan, "Osseointegration: an update," The Journal of Indian Prosthodontic Society, vol. 13, no. 1, pp. 2-6, November 2013.
[18] J. Rojek and J. J. Telega, "Contact problems with friction, adhesion and wear in orthopedic biomechanics," Journal of Theoretical and Applied Mechanics, vol. 3, no. 39, January 2001.
[19] P. J. Rao, M. H. Pelletier, W. R. Walsh, and R. J. Mobbs, "spine interbody implants: Material Selection and modification, functionalization, and bioactivation of surfaces to improve osseointegration," Orthopaedic
Surgery, vol. 6, no. 2, pp. 81-89, 2014.
[20] A. Bhattacharya, N. B. Watts, K. Davis, S. Kotowski, and R. Shukla, "Dynamic bone quality-a non-invasive measure of bone's biomechanical property," Journal of Clinical Densitometry, vol. 11, no. 3, pp. 449-450, 2008.
[21] A. K. Garg, "Bone Biology, Osseointegration, and Bone Grafting," in Implant Dentistry. A Practical Approach, Oxford, Mosby Elsevier, 2010, pp. 193-211.
[22] E. Donelly, "Methods for Assessing Bone Quality: A Review," Clinical Orthopaedics and Related Research, vol. 469, no. 8, pp. 2128-2138, 2010.
[23] G. R. Cointry, R. F. Capozza, A. L. Negri, E. J. A. Roldan, and J. L. Ferreti, "Biomechanical background for a noninvasive assessment of bone strength and muscle-bone interactions," J Musculoskel Neuron Interact, vol. 4, no. 1, pp. 1-11, 2003.
[24] H. Alva, K. Prasad, and A. Prasad, "Biomechanical considerations in osseointegrated support prosthesis," Live Dental, [Online]. Available: https://livedental.in/articles/implantology/146-biomechanical-considerations-inosseointegrated-supported-prosthesis.
[25] I. Tugcu, I. Safaz, B. Yilmaz, A. S. Goktepe, M. A. Taskaynatan, and K. Yazicioglu, "Muscle strength and bone mineral density in mine victims with transtibial amputation," Prosthetics and Orthotics International, vol. 33, no. 4, pp. 299-306, 2009.
[26] J. Burck and J. Bigelow, "Revolutionizing Prosthetics: Extreme Transdisciplinary Systems Engineering," Insight, vol. 13, no. 4, pp. 25-28, 2010.
[27] J. M. Patsch, A. J. Burghardt, G. Kazakia and S. Majumdar, "Noninvasive imaging of bone microarchitecture," Annals of the New York Academy of Sciences, vol. 1240, no. 1, pp. 77-87, 2011.
[28] N. A. Andrews, "Noninvasive evaluation of bone microarchitecture and strength: better than DXA?," IBMS Bonekey, vol. 9, 2012.
[29] "Glossary of Orthotic & Prosthetic Terms," West Coast Brace and Limb, [Online]. Available:
http://www.wcbl.com/op-resources-2/glossary-of-terms/.
[30] Radiological Society of North America, "Skeletal Scintigraphy (Bone Scan)," RadiologyInfo.org, 15 June 2020.
[Online]. Available: https://www.radiologyinfo.org/en/info/bone-scan. [Accessed 25 January 2022].
[31] B. J. Zadler, J. H. L. Le Rousseau, J. A. Scales and M. L. Smith, "Resonant Ultrasound Spectroscopy: theory and application," Geophysical Journal International, vol. 156, no. 1, pp. 154-169, 2004.
[32] J. R. Gladden, "Resonant Ultrasound Spectroscopy," Joseph R. Gladden, 2007. [Online]. Available: http://www.phy.olemiss.edu/~jgladden/rus/.
[33] N. J. MacIntyre and A. L. Lorbergs, "Imaging-Based Methods for Non-invasive Assessment of Bone Properties Influenced by Mechanical Loading," Physiotherapy Canada, vol. 64, no. 2, pp. 202-215, 2012.
[34] J. L. Tremoleda, M. Khalil, L. L. Gompels, M. Wylezinska-Arridge, T. Vincent and W. Gsell, "Imaging technologies for preclinical models of bone and joint disorders," EJNMMI Research, vol. 1, no. 11, pp. 1-14, 2011.
[35] V. Vijayakumar, "Quantifying the regional variations in the mechanical properties of cancellous bone of the tibia using indentation testing and CT imaging," McMaster University, Hamilton, 2013.
[2] J. Foort, "Modular prosthetics-a philosophical view*," Prosthetics and Orthotics International, vol. 3, November 1978.
[3] S. Jonsson, K. Caine-Winterberger and R. Branemark, "Osseointegration amputation prostheses on the upper limbs: methods, prosthetics and rehabilitation," Prosthetics and Orthotics International, vol. 35, no. 2, pp. 1990-200, January 2011.
[4] A. B. Wilson, "Lower-limb modular prostheses: a status report," Orthotics and Prosthetics, vol. 29, no. 1, pp. 23-32, 1975.
[5] B. Resnick, "The Problem With Modern-Day, High-Tech Prosthetics," Popular Mechanics, March 2010. [Online]. Available: http://www.popularmechanics.com/science/health/a6302/high-tech-prosthetics-fitting/. [Accessed January 2016].
[6] A. Tathe, M. Ghodke and A. P. Nikalje, "A brief review: biomaterials and their application," International Journal of Pharmacy and Pharmaceutical Sciences, vol. 2, no. 4, pp. 19-23, 2011.
[7] J. R. Jameson, "Characterization of bone material properties and microstructure in osteogenesis imperfecta/brittle bone disease," Marquette University, Milwaukee, 2014.
[8] S. L. Lancianese, E. Kwok, C. A. Beck, and A. L. Lemer, "Predicting regional variations in trabecular bone mechanical properties within the human proximal tibia using MR imagining," Bone, vol. 43, no. 6, pp. 1039-1046, 2008.
[9] S. Bhalla and S. Bajaj, "Bone characterization using piezo transducers as biomedical sensors," Strain, vol. 44, no. 6, pp. 475-478, 2008.
[10] J. Chen, M. A. Birch and S. J. Bull, "Nanomechanical characterization of tissue-engineered bone grown on titanium alloy in vitro," Journal of Materials Science: Materials in Medicine, vol. 21, no. 1, pp. 277-282, 2009.
[11] F. G. Evans, "Mechanical properties of bone," Artificial Limbs, vol. 13, no. 1, pp. 37-48, 1973.
[12] A. D. P. Bankoff, "Biomechanical characteristics of the bone," in Human Musculoskeletal Biomechanics,
London, IntechOpen, 2012, pp. 61-86.
[13] M. Kutz, T. M. Keaveny, E. F. Morgan and O. C. Yeh, "Chapter 8," in Standard handbook of biomedical
engineering and design, New York, McGraw-Hill, 2003.
[14] A. Kemper, C. McNally, E. Kennedy, S. Manoogian, and S. Duma, "The material properties of human tibia cortical bone in tension and compression: implications for the tibia index," Virginia Tech – Wake Forest, Center for Injury Biomechanics, Blacksburg, 2007.
[15] K. G. Faulkner, C. C. Glüer, S. Majumdar, P. Lang, K. Engelke, and H. K. Genant, "Noninvasive measurements of bone mass, structure, and strength: current methods and experimental techniques," American Journal of Roentgenology, vol. 157, no. 6, pp. 1229-1237, 1991.
[16] K. Buckley, J. Kerns, P. D. D. Gikas, H. L. Birch, R. Keen, A. W. Parker, P. Matousek, and A. E. Goodship, "Measurement of abnormal bone composition in vivo using noninvasive Raman spectroscopy," IBMS Bonekey, vol. 11, no. 602, 2014.
[17] S. Parithimarkalaignan and T. V. Padmanabhan, "Osseointegration: an update," The Journal of Indian Prosthodontic Society, vol. 13, no. 1, pp. 2-6, November 2013.
[18] J. Rojek and J. J. Telega, "Contact problems with friction, adhesion and wear in orthopedic biomechanics," Journal of Theoretical and Applied Mechanics, vol. 3, no. 39, January 2001.
[19] P. J. Rao, M. H. Pelletier, W. R. Walsh, and R. J. Mobbs, "spine interbody implants: Material Selection and modification, functionalization, and bioactivation of surfaces to improve osseointegration," Orthopaedic
Surgery, vol. 6, no. 2, pp. 81-89, 2014.
[20] A. Bhattacharya, N. B. Watts, K. Davis, S. Kotowski, and R. Shukla, "Dynamic bone quality-a non-invasive measure of bone's biomechanical property," Journal of Clinical Densitometry, vol. 11, no. 3, pp. 449-450, 2008.
[21] A. K. Garg, "Bone Biology, Osseointegration, and Bone Grafting," in Implant Dentistry. A Practical Approach, Oxford, Mosby Elsevier, 2010, pp. 193-211.
[22] E. Donelly, "Methods for Assessing Bone Quality: A Review," Clinical Orthopaedics and Related Research, vol. 469, no. 8, pp. 2128-2138, 2010.
[23] G. R. Cointry, R. F. Capozza, A. L. Negri, E. J. A. Roldan, and J. L. Ferreti, "Biomechanical background for a noninvasive assessment of bone strength and muscle-bone interactions," J Musculoskel Neuron Interact, vol. 4, no. 1, pp. 1-11, 2003.
[24] H. Alva, K. Prasad, and A. Prasad, "Biomechanical considerations in osseointegrated support prosthesis," Live Dental, [Online]. Available: https://livedental.in/articles/implantology/146-biomechanical-considerations-inosseointegrated-supported-prosthesis.
[25] I. Tugcu, I. Safaz, B. Yilmaz, A. S. Goktepe, M. A. Taskaynatan, and K. Yazicioglu, "Muscle strength and bone mineral density in mine victims with transtibial amputation," Prosthetics and Orthotics International, vol. 33, no. 4, pp. 299-306, 2009.
[26] J. Burck and J. Bigelow, "Revolutionizing Prosthetics: Extreme Transdisciplinary Systems Engineering," Insight, vol. 13, no. 4, pp. 25-28, 2010.
[27] J. M. Patsch, A. J. Burghardt, G. Kazakia and S. Majumdar, "Noninvasive imaging of bone microarchitecture," Annals of the New York Academy of Sciences, vol. 1240, no. 1, pp. 77-87, 2011.
[28] N. A. Andrews, "Noninvasive evaluation of bone microarchitecture and strength: better than DXA?," IBMS Bonekey, vol. 9, 2012.
[29] "Glossary of Orthotic & Prosthetic Terms," West Coast Brace and Limb, [Online]. Available:
http://www.wcbl.com/op-resources-2/glossary-of-terms/.
[30] Radiological Society of North America, "Skeletal Scintigraphy (Bone Scan)," RadiologyInfo.org, 15 June 2020.
[Online]. Available: https://www.radiologyinfo.org/en/info/bone-scan. [Accessed 25 January 2022].
[31] B. J. Zadler, J. H. L. Le Rousseau, J. A. Scales and M. L. Smith, "Resonant Ultrasound Spectroscopy: theory and application," Geophysical Journal International, vol. 156, no. 1, pp. 154-169, 2004.
[32] J. R. Gladden, "Resonant Ultrasound Spectroscopy," Joseph R. Gladden, 2007. [Online]. Available: http://www.phy.olemiss.edu/~jgladden/rus/.
[33] N. J. MacIntyre and A. L. Lorbergs, "Imaging-Based Methods for Non-invasive Assessment of Bone Properties Influenced by Mechanical Loading," Physiotherapy Canada, vol. 64, no. 2, pp. 202-215, 2012.
[34] J. L. Tremoleda, M. Khalil, L. L. Gompels, M. Wylezinska-Arridge, T. Vincent and W. Gsell, "Imaging technologies for preclinical models of bone and joint disorders," EJNMMI Research, vol. 1, no. 11, pp. 1-14, 2011.
[35] V. Vijayakumar, "Quantifying the regional variations in the mechanical properties of cancellous bone of the tibia using indentation testing and CT imaging," McMaster University, Hamilton, 2013.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Downloads
Download data is not yet available.